![[ANSYS, Inc. Logo]](https://www.afs.enea.it/project/neptunius/docs/fluent/html/udf/fluentlogo.gif)
|
|
|
The macros listed in Table 3.2.20- 3.2.23 can be used to return real face variables in SI units. They are identified by the F_ prefix. Note that these variables are available only in the pressure-based solver. In addition, quantities that are returned are available only if the corresponding physical model is active. For example, species mass fraction is available only if species transport has been enabled in the Species Model dialog box in ANSYS FLUENT. Definitions for these macros can be found in the referenced header files (e.g., mem.h).
Face Centroid (
F_CENTROID)
The macro listed in Table 3.2.20 can be used to obtain the real centroid of a face. F_CENTROID finds the coordinate position of the centroid of the face f and stores the coordinates in the x array. Note that the x array is always one-dimensional, but it can be x[2] or x[3] depending on whether you are using the 2D or 3D solver.
The ND_ND macro returns 2 or 3 in 2D and 3D cases, respectively, as defined in Section 3.4.2. Section 2.3.15 contains an example of F_CENTROID usage.
Face Area Vector (
F_AREA)
F_AREA can be used to return the real face area vector (or `face area normal') of a given face f in a face thread t. See Section 2.7.3 for an example UDF that utilizes F_AREA.
By convention in ANSYS FLUENT, boundary face area normals always point out of the domain. ANSYS FLUENT determines the direction of the face area normals for interior faces by applying the right hand rule to the nodes on a face, in order of increasing node number. This is shown in Figure 3.2.1.
ANSYS FLUENT assigns adjacent cells to an interior face ( c0 and c1) according to the following convention: the cell out of which a face area normal is pointing is designated as cell C0, while the cell in to which a face area normal is pointing is cell c1 (Figure 3.2.1). In other words, face area normals always point from cell c0 to cell c1.
Flow Variable Macros for Boundary Faces
The macros listed in Table 3.2.22 access flow variables at a boundary face.
Avoid random “PSP save generators” or sites filled with pop-up ads. They often deliver viruses or dummy files. Stick to community-driven forums.
: A save from a European (PAL) version of the game will not work with a North American (NTSC) version. The code to unlock Shaq in 'UFC Undisputed 2010' - ESPN ufc undisputed 2010 save data for psp
: Enter a secret code at the main menu. On the PSP, press Right, Up, Left, Right, Down, Left, Up, Right, Down, Left, Square, Triangle, Triangle, Square, Start . Tapout Crew : , , and Avoid random “PSP save generators” or sites filled
While many fighters are unlocked through play, a famous secret code allows you to unlock Shaquille O'Neal immediately at the main menu without needing a special save file: Right, Up, Left, Right, Down, Left, Up, Right, Down, Left, Square, Triangle, Triangle, Square, Start . Managing Your Data : A save from a European (PAL) version
Unlike many sports games, your fighter's skills will naturally decline if you don't maintain training, which is recorded in your save. Created Fighters (CAF): You can manage multiple careers. In the load menu, you can
Just remember to back up your original data, respect the file structure, and enjoy the sweet taste of a first-round knockout without the prefight tedium.
The installation process depends on whether you are using an actual PSP or an emulator like PPSSPP. For PSP Hardware Connect your PSP to your computer via USB. folder on the memory stick. Copy the unzipped save folder (e.g., for USA or for EUR) into this directory. For PPSSPP (Android/PC) Locate your emulator's storage folder (usually named Navigate to Paste the downloaded save folder here.
See Section 2.7.3 for an example UDF that utilizes some of these macros.
Flow Variable Macros at Interior and Boundary Faces
The macros listed in Table 3.2.23 access flow variables at interior faces and boundary faces.
F_FLUX can be used to return the real scalar mass flow rate through a given face f in a face thread t. The sign of F_FLUX that is computed by the ANSYS FLUENT solver is positive if the flow direction is the same as the face area normal direction (as determined by F_AREA - see Section 3.2.4), and is negative if the flow direction and the face area normal directions are opposite. In other words, the flux is positive if the flow is out of the domain, and is negative if the flow is in to the domain.
Note that the sign of the flux that is computed by the solver is opposite to that which is reported in the ANSYS FLUENT GUI (e.g., the Flux Reports dialog box).
Previous:
3.2.3 Cell Macros
