Manual — Xycd60

| Code | Function | Description | |------|----------|-------------| | P1 | Over-voltage cutoff | Load disconnects if voltage > this value | | P2 | Over-voltage reconnect | Voltage must drop below this to re-engage | | P3 | Under-voltage cutoff | Load disconnects if voltage < this value | | P4 | Under-voltage reconnect | Voltage must rise above this to re-engage | | P5 | Over-current cutoff | Load disconnects if current > this value | | P6 | Delay time (seconds) | Delay before reconnecting after fault | | P7 | Start delay | Delay before relay engages on power-up |

The module supports two primary configurations based on your setup: xycd60 manual

The is a DC 6V–60V battery charge and discharge controller designed to automate battery maintenance and prevent damage from overcharging or deep discharging. It functions as a voltage-sensitive relay, acting as an automated switch between your power source and the battery. 🛠️ Key Specifications Operating Voltage: DC 6V–60V. Maximum Current: Generally rated for 10A through the relay. Control Precision: 0.1V. Modes: Charging (P-1/IN) and Discharging (P-2/OUT). Maximum Current: Generally rated for 10A through the relay

The (and its variant ) is a specialized battery charging and discharging control module designed for a wide voltage range of DC 6V to 60V . It serves as an intelligent switch that prevents battery damage by cutting off the circuit when specific voltage thresholds are reached. 1. Core Functionality and Operating Modes The (and its variant ) is a specialized

(Lower Limit), protecting the battery from permanent damage due to deep discharge. 4. Key Features and Advanced Settings Time Control:

Troubleshooting quick reference