Asprogrammer 2.1.0.13 [verified] Here

: Used in conjunction with hardware modifications to read and write automotive EEPROMs for tasks like odometer correction or ECU work. Common Procedures

AsProgrammer 2.1.0.13 is compatible with Windows 7, 10, and 11. It requires the appropriate drivers for your specific hardware programmer (such as the CH341PAR driver for the CH341A) to be installed on the host system. with this specific software version?

Users of the "Black" (1.8v/3.3v switchable) programmers often face detection issues. This update includes refined logic for detecting chips in ZIF sockets and via the SOIC/JTAG clips. It minimizes those "Chip not found" errors that plague older software versions when using the 1.8v mode. Asprogrammer 2.1.0.13

: For SPI flash chips (25 series), the "Auto Detect" button can identify the chip ID and signature automatically, saving you from hunting through datasheets.

Asprogrammer supports command-line arguments. Create a batch file to automate flashing: Asprogrammer.exe -p -e -v -chip W25Q64FV -file firmware.bin This command programs ( -p ), erases ( -e ), verifies ( -v ), and uses a specific chip. : Used in conjunction with hardware modifications to

Getting started is straightforward, but requires a few specific steps to ensure the software communicates with your hardware:

| Type | Examples | Protocol | |------|----------|----------| | SPI NOR flash | Winbond W25Q, Macronix MX25, GigaDevice GD25 | SPI | | 24/25 series EEPROM | AT24C, CAT24, Microchip 25LCxxx | I2C, Microwire | | 93 series EEPROM | 93C46/56/66 (8/16-bit modes) | 3-wire serial | | I2C SRAM/FRAM | M24M01, FM24CL64 | I2C | | Some MCUs (partial) | Atmel ATtiny (ISP), STM8 (SWIM) | Custom | with this specific software version

Edit database/chips.txt – format: