You need a high-quality USB 2.0 or 3.0 drive with at least 4GB to 32GB of capacity. Format: The drive must be formatted to FAT32 .
The Uconnect 18.45.01 software update is a critical firmware release primarily designed for 2013–2017 Chrysler, Dodge, Jeep, and RAM vehicles. This update is widely known among owners for fixing a significant "GPS Rollover" issue that caused navigation systems to lose accuracy and clocks to reset or fail.
| | Instructions | |------------|------------------| | OTA (Over-the-Air) | Vehicle must have active connected services (SiriusXM Guardian or Uconnect Access). The update pushes automatically when vehicle is parked with strong LTE signal. No user action required. | | Dealer Installation | Free if vehicle under warranty or recall. Otherwise, dealer may charge ~$50–$150 labor. | | DIY USB Download | 1. Go to https://www.driveuconnect.com → “Software Update” 2. Enter VIN → if 18.45.01 is eligible, download ZIP file. 3. Extract to a FAT32-formatted USB drive (16–32GB recommended). 4. Insert into vehicle USB port (usually center console) → ignition RUN → follow screen prompts. | uconnect software update 18.45.01 download
“The update succeeded, but my fuel economy screen is now missing from the Vehicle tab. Had to do a factory reset.”
If your Uconnect system works perfectly, . But if you have any of the Bluetooth, CarPlay, or freezing issues mentioned above, 18.45.01 is worth the 20-minute install . You need a high-quality USB 2
When to visit a dealer
This report provides a focused analysis of , including its intended benefits, official download sources, installation prerequisites, and potential troubleshooting notes. This update is widely known among owners for
Once you have the official Uconnect_18.45.01.zip file, do not simply copy it to any USB stick. Preparation is key.