1kz Ecu Pinout ((full)) Official

When probing the 1KZ-TE ECU pins:

Understanding the is essential for anyone performing an engine swap, installing a tuning module, or troubleshooting electrical gremlins in a classic Toyota Hilux or Land Cruiser Prado. This guide provides a comprehensive breakdown of the core terminal configurations and essential wiring tips for this legendary 3.0L turbo diesel engine. Overview of the 1KZ-TE Engine Control Unit 1kz ecu pinout

Controls the fuel quantity injected into the cylinders. TCV (Timer Control Valve): Adjusts injection timing. S-REL: Glow plug relay control. W: Check Engine Light (MIL) output. Variations Between Models When probing the 1KZ-TE ECU pins: Understanding the

Check the E2 sensor ground. If this ground is "noisy" or loose, all sensor readings will fluctuate. Conclusion TCV (Timer Control Valve): Adjusts injection timing

| Pin | Wire Color | Signal Name | Function | Voltage / Signal | | :--- | :--- | :--- | :--- | :--- | | | White/Red | +B1 | ECU Main Relay Power (Constant 12V from relay) | 12V (Key ON) | | A2 | Black/Orange | E01 | Power Ground (Injector driver return) | 0V | | A3 | Yellow/Black | #10 | Injector Driver – Cylinder 1 | Pulse (Battery voltage spike) | | A4 | Yellow | #20 | Injector Driver – Cylinder 2 | Pulse | | A5 | Light Green | #30 | Injector Driver – Cylinder 3 | Pulse | | A6 | White/Black | E02 | Power Ground (Sensor return) | 0V | | A7 | N/A | N/C | Not Connected | - | | A8 | Blue/Red | SCV+ | Spill Control Valve (+) (Fuel quantity) | PWM (0-12V pulses) | | A9 | Blue/Yellow | SCV- | Spill Control Valve (-) (Fuel quantity) | PWM (0-12V pulses) | | A10 | Yellow/Red | MREL | Main Relay Control (ECU switches relay ground) | 12V (Key ON) | | A11 | Red/White | +B | Constant ECU Backup Power (Memory) | 12V (Constant) | | A12 | White/Blue | IGSW | Ignition Switch Signal | 12V (Key ON) | | A13 | Blue/White | Stop L | Brake Pedal Signal (for idle-up logic) | 0V (Brake off) / 12V (Brake on) | | A14 | Black/White | E03 | Sensor Ground (ECU internal) | 0V | | A15 | Brown | #40 | Injector Driver – Cylinder 4 | Pulse | | A16 | Red | VCV+ | Timing Control Valve (+) | PWM | | A17 | Light Green/Black | VCV- | Timing Control Valve (-) | PWM | | A18 | Blue/Black | EDU | EDIC (Fuel cut solenoid – early models) | 12V (Run) / 0V (Stop) | | A19 | Black/Red | E04 | Shield Ground (for sensor cables) | 0V | | A20 | N/A | N/C | Not Connected | - | | A21 | N/A | N/C | Not Connected | - | | A22 | Black/Yellow | EO1 | Power Ground (High current) | 0V |