Cobra 3195 Alarm Manual Full High Quality Online

: If the PIN is correct, the LED will stay lit. Press the large button on each new remote you wish to program. The LED will flash to confirm. Exit : Turn the ignition OFF to save settings. Emergency Override

The immobilizer is still active. Insert key, turn ignition ON, press disarm button. If still no start, use valet button: Turn ignition ON, press valet button for 4 seconds until LED turns off. cobra 3195 alarm manual full

: When the LED goes out, turn the ignition ON and count the flashes until they match the first digit of your 4-digit PIN . Turn the ignition OFF, then back ON to enter the next digit. Repeat for all four digits. : If the PIN is correct, the LED will stay lit

Allows the user to trigger the alarm manually in an emergency. 2. Operating Your Alarm Arming Press the large button (Button A) on the remote control. Indicators blink twice; LED on dashboard begins flashing. Disarming Press the small button (Button B) on the remote. Indicators blink once; LED goes off. Temporary Bypass Exit : Turn the ignition OFF to save settings

The Cobra 3195 has an internal shock sensor (usually on the control module near the fuse box). The manual explains:

on each remote. The security LED will blink once to confirm each one. Turn off the ignition to exit. Midlands Lotus Owners Club 4. Troubleshooting LED Flash Codes