Drumbrute: Mods Link
Solder two diodes (like 1N4148) in parallel (opposite directions) to ground on the output of the Snare or Kick circuit. This squares off the waveform for a "harder" sound. The Build:
If you want more advanced ideas (e.g., adding a second noise source, CV over filter on the FM drum, or replacing the internal clock with external), let me know and I can go deeper. drumbrute mods
The DrumBrute is known for its open architecture regarding CV/Gate, but the internal circuitry offers several points for modification ("bending") to alter the sound character. Solder two diodes (like 1N4148) in parallel (opposite
The following component-level mods can be performed by soldering resistors or capacitors to specific points on the circuit board: adding a second noise source
