Type the entire 8-bit string (e.g., 00100000 ) and press INPUT .
Old Fanuc OT controls have volatile CMOS batteries. Use the PUNCH function to output all parameters to a PC: fanuc ot 900 parameter list
Find the PWE (Parameter Write Enable) setting and change it from 0 to 1 . The CNC will typically trigger an alarm (e.g., P/S 100), which is normal. : Type the entire 8-bit string (e
Below are the primary option parameters for the 0-T control. Each parameter consists of 8 bits (labeled 7 to 0 from left to right). Description Canned Cycle (Basic) G10 Program Input of Offset Inch / Metric Conversion Special G Code Tape Memory Addition (120m) Chamfering / Corner Radius Multiple Repetitive Canned Cycles (G70-G76) Constant Surface Speed Control Stored Pitch Error Compensation Custom Macro A Actual Spindle Speed Output Number of Programs (Set to 125) Soft Keys Below CRT The CNC will typically trigger an alarm (e
Deutsch